-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Adam Turvey wrote: Not that hard actually, but it will be a lot easier if your router's external IP address is static and your ISP doesn't block ports. Some ISPs block port 25 and insist that all SMTP connections from inside or outside of their network goes through their mail servers to stop people unwittingly hosting open relays or having compromised PCs spamming. One thing to think about before you get going it that if you're on a consumer grade ADSL line, you probably have 448Kb/s upload speed (note that b is bits, not B for bytes), which is about 40KB/s and is fine for a friends and family kind of website/mail server but won't hold up to a reasonably popular site doing lots of photos. That said, I did host my site on an 800Kb/s upload business ADSL line for a few days a while back and I'm sure people are hosting on less than 440Kb/s, a previous company of mine hosted on a 64Kb/s ISDN line when they first started. First of all, configure your server with a static IP address on your local network. Use your router to port forward the necessary ports from outside to the IP address of your server. So for example you set your server as 192.168.1.250 and you forward the following ports to your server: SMTP: 25 HTTP: 80 POP3: 110 IMAP: 143 (if you want it) HTTPS: 443 (if you want it) If your router can't forward ports then you need a better router, I'm sure it should do though. Maybe just port forward 80 at first and then do the rest as you go along and set things up. You should now be able to access your web and samba server on it's local address from inside (192.168.1.250) and your webserver again by typing in your router's external IP address into your browser. Some routers don't allow internal connections to access an internal machine on an external address in this way, by going out and back in again so this may not work for you. Try accessing the external address from a friend's house if it doesn't work for you from home. On your domain registration account you will have a control panel which lets you manage your DNS. You can either set up the host names and IP addresses in this control panel or use a DNS service like zoneedit.com to manage your DNS, zoneedit is free by the way. If your external IP address isn't static then it gets a bit more complicated and you will have to look at a dynamic DNS service like dyndns.org to manage your DNS for you. If you're lucky your router will already have built in support for keeping dyndns.org up to date with your IP address every time it changes. I've been buying ADSL with static IP addresses for a few years for the sole reason that I don't have to mess with dynamic DNS if I need to run something from home. If you have a dynamic IP and your router doesn't support it you will have to read up on how to run a dyndns client to keep it informed of your IP address so that your host name always resolves to your IP address even when it has changed recently. Normal (not dynamic) DNS looks and sounds hard but actually isn't really. For your domain name to resolve to your IP address you need 2 things. 1) One of more DNS servers, ideally 2 or more. Your domain registrar will probably provide these but you can use zoneedit.com or dyndns.org. DynDNS might charge you for using a proper domain rather than yourname.dyndns.org they might not, I forget. 2) A couple of DNS records. I won't go into the details of DNS but for normal web browsing you can make 2 A records which map host names to IP addresses for the following: silverrook.co.uk www.silverrook.co.uk and give them the same IP address (even though you only have one IP anyway) so people browsing your site get the same site regardless of whether they include the www bit (use the ServerName and ServerAlias directive in Apache to serve both), otherwise one will produce your site the other will give an error. Mail is a bit more complicated and needs a different type of DNS record, called an MX record, as opposed to the A records you just created. So decide on a name for your mail server, it can just be www.silverrook.co.uk or silverrook.co.uk as it's the same machine, though I prefer to use mail.silverrook.co.uk. Give it a priority of 10. You aren't going to have any other mail server because you don't have any more IPs but the lower the number the higher it's priority. If you wanted a backup mail server on a different IP, you could call it mail1.silverrook.co.uk and give it a priority of 20. Now create the A record which say where the name given in your MX record is, which is obviously your external IP as it's all you have. DNS changes generally take a few hours to take effect or even 3 days or so, depending on how the DNS server you use is configured (zoneedit allows you to configure it). Once the DNS changes take effect people should be able to send mail to your domain, you just need to open up that port forward to port 25 on your router and have a mail server listening on the other end. You probably also want to forward port 110 for POP3 and/or port 143 for IMAP access to your mail or run a webmail client like Squirrelmail, Horde/IMP, Neomail, Ilohamail or whatever Of course the complicated bit is setting up a mail server with SMTP and POP3/IMAP listening on the other end :) For a web server the Apache documentation is excellent and I presume the Ubuntu docs are good too. Take a look at: http://www.howtoforge.com/ for recipe style howtos on mail and web serving and: http://www.linuxhomenetworking.com/ for developing your home network, your networking and your server skills with Linux. As an aside, be cautious security wise as a compromise on any of the services your are offering the world will potentially allow the cracker access to your whole local network. If you can, set up a DMZ on your router using a different network range to your LAN and put your server on it. Your router should understand that it can allow traffic to it and back from your LAN but not the other way around. Also beware that things like Squirrelmail need to be kept up to date as they have a history of security problems. Try to avoid running an open relay, this is a mail server which allows anyone to connect and send mail through it. Using SMTP authentication is a good way or only allowing relays from specified IP addresses, which is fine on your LAN but a pain in the ass when you're not at home. Other than that, this is a great project for anybody who is interested in this kind of thing and it's exactly how I learning this kind of stuff. If your router can't do DMZs or port forwarding, you might want to think about putting a Smoothwall or IPCop machine with 3 network cards between it and your LAN, thereby allowing your to separate your traffic from WAN, LAN and DMZ. Smoothwall and IPCop can run on as little as early Pentiums with 64 MB RAM. Anyway, far too much detail and I've probably lost everyone. Me too :) Regards, Adam Sweet - -- http://blog.adamsweet.org/

On 19/03/2008, Adam Sweet <adam(a)adamsweet.org&gt; wrote: 'An excellent HOW TO'. Can Adam's explanation be incorporated into the LUG home page somewhere? It certainly deserves to be accessible; if Adam agrees? -- ============================================== Kevan Farmer Linux user #373362 Staffordshire

sounds good to me

That doesn't mean that you should give up on hosting mail from home, it's not ideal as some people won't accept mail from you, but it doesn't mean that it won't work without setting your reverse DNS. I should also mention that some ISPs add their consumer cable and DSL ranges to RBLs (Real-time Black Lists) as most spam comes from compromised machines these days. I remember that people hosted on 1and1 wouldn't accept mail from me when I hosted from home. Add this to the article too :) Regards, Adam Sweet -- http://blog.adamsweet.org/